🧬 BPC-157 Dosage Calculator

Select your injection frequency, dose per injection, vial size, and BAC water volume — concentration, draw volume, daily totals, and vial duration computed instantly.

BPC-157 Reconstitution & Dose Calculator

BPC-157 (Body Protection Compound-157) is a synthetic pentadecapeptide consisting of 15 amino acids derived from a protective gastric protein. It is among the most-researched peptides for injury healing, tissue repair, angiogenesis, gut protection, and tendon/ligament regeneration. Unlike GLP-1 agonists, BPC-157 has a short half-life (~4 hours via subcutaneous injection) which means protocols typically split the daily dose into two injections — or use a single morning dose for systemic effects. It is supplied as lyophilised powder and must be reconstituted before use.

Select your injection frequency, dose per injection, vial size, and bacteriostatic water volume. The calculator returns exact concentration, per-dose draw volume, daily total volume, and how many days your vial will last at that protocol.

📖 Worked Example

You have a 5 mg BPC-157 vial, add 2 mL BAC water, and inject 500 mcg twice daily on a 0.3 mL syringe.

  1. Concentration = (5 × 1,000) ÷ 2 = 2,500 mcg/mL
  2. Per-dose volume = 500 ÷ 2,500 = 0.2 mL (20 units)
  3. Daily volume = 0.2 × 2 injections = 0.4 mL
  4. Vial duration = 2,000 mL ÷ 1,000 mcg/day = 5 days
⚠️ BPC-157 research protocols vary widely. This tool is for educational and research reference only — consult available literature and qualified professionals before use.
1

Injection frequency

2

Dose per injection

3

BPC-157 vial size

4

Bacteriostatic water added

5

Syringe volume

Concentration
—
mcg / mL
—
Volume Per Dose
—
mL
— units
Daily Total
—
mcg / day
— mL/day
Doses / Vial
—
doses
at this dose size
Vial Duration
—
days
at this frequency
Syringe Draw Guide

Select your inputs above to generate your draw guide.

0——
Save or share this calculation with your current settings.
BPC-157 Common Research Protocols

Reference draw uses a 5 mg vial + 2 mL BAC water = 2,500 mcg/mL. BPC-157 is typically injected subcutaneously near the injury site or systemically in the abdomen.

ProtocolDose / InjectionDaily TotalFrequencyDraw (2,500 mcg/mL)5mg Vial Lasts
Low dose250 mcg250 mcgOnce daily10 units U-10020 days
Standard500 mcg500 mcgOnce daily20 units U-10010 days
Split dose500 mcg1,000 mcgTwice daily20 units U-1005 days
High dose1,000 mcg1,000 mcgOnce daily40 units U-1005 days

BPC-157 is typically used for 4–12 week cycles with a break of similar duration. Longer cycles have been used in research without reported safety issues, but remain unstudied in humans at these durations.

BPC-157 Calculator — Frequently Asked Questions

Should I inject BPC-157 near the injury or systemically?+

Both approaches are used in research. Localised injection directly near (not into) an injured tendon, ligament, or muscle may produce faster tissue-specific effects due to higher local concentrations. Systemic injection (abdominal subcutaneous fat) distributes the compound and is preferred when targeting gut healing, systemic inflammation, or multiple injury sites simultaneously. Many protocols use systemic injection for convenience, with research suggesting comparable outcomes for conditions like leaky gut or general tissue repair.

What is BPC-157's half-life and why does it matter for dosing frequency?+

BPC-157 has a relatively short half-life of approximately 4 hours via subcutaneous injection. This means once-daily dosing achieves systemic coverage for only part of the day. Twice-daily dosing (morning and evening) maintains more consistent circulating levels, which some protocols use for injury recovery where continuous signalling may be beneficial. For gut-related indications, the oral route (no reconstitution needed) may maintain GI luminal levels more efficiently due to direct contact.

How long should a BPC-157 cycle run?+

Research protocols vary from 2 weeks (acute injury) to 12+ weeks (chronic conditions). A common approach is 4–8 weeks on, followed by a break of equal duration. Unlike many peptides, BPC-157 does not appear to downregulate its receptors with prolonged use, but extended protocols beyond 3 months remain insufficiently studied in humans. Acute injury protocols may use shorter runs with higher daily doses; chronic gut or systemic protocols tend to use lower doses over longer periods.

Can BPC-157 be stacked with TB-500?+

Yes — BPC-157 + TB-500 is one of the most well-known peptide stacks in recovery research. They work through complementary mechanisms: BPC-157 acts primarily via local growth factor upregulation, angiogenesis (VEGF), and direct tendon/ligament cell stimulation; TB-500 (Thymosin β4) promotes systemic cell migration, actin polymerisation, and anti-inflammatory effects. Used together, they address both local and systemic aspects of tissue repair. A common research stack is 500 mcg BPC-157 daily + 2 mg TB-500 twice weekly.

More Calculators

🧪
Reconstitution Calculator
Calculate peptide concentration and exact draw volumes from vial size and BAC water. Includes dosing table and BAC water optimizer.
→
💉
Injection Volume Calculator
Convert dose and concentration to the exact mL and syringe unit mark. U-100 and U-40 support with precision warnings.
→
⚖️
Body Weight Calculator
Calculate your personalised total dose from a per-kilogram research protocol with kg / lbs conversion.
→
📅
Vial Duration Calculator
Find how many days your reconstituted vial lasts and flag any 28-day expiry window issues.
→
💰
Cost Calculator
Calculate cost per dose, weekly spend, monthly budget, and full cycle cost for any peptide protocol.
→
📈
GLP-1 Titration Planner
Complete semaglutide or tirzepatide titration schedule with weekly doses, reconstitution instructions, and vial planning.
→
🏗️
Protocol Builder
Build a full multi-peptide weekly injection schedule with vial requirements for your cycle length.
→
📋
Peptide Reference Table
Searchable dosing reference for 23 peptides: dose ranges, frequency, route, and research notes.
→
⚡
Retatrutide Calculator
Calculate retatrutide reconstitution concentration, exact draw volume, and doses per vial for your weekly protocol.
→
💊
Ozempic (Semaglutide) Calculator
Calculate semaglutide reconstitution concentration, draw volume, and doses per vial for every titration phase from 0.25 mg to 2 mg.
→
📈
Tirzepatide Calculator
Six-phase tirzepatide reconstitution and dosing calculator — 2.5 mg to 15 mg/week with exact draw volumes for every vial size.
→
💪
TB-500 Calculator
TB-500 loading and maintenance phase calculator — dose per injection, vial size, BAC water, and syringe draw volume.
→
💧
BAC Water Optimizer
Reverse-calculate the ideal bacteriostatic water volume to achieve a target draw size for any dose and vial combination.
→
⏳
Peptide Half-Life Tracker
Track how much peptide remains active after your injection — see time to 50%, time to clear, and a visual decay timeline for 22 compounds.
→
🔬
Peptide Stack Compatibility
Check compatibility between 2–3 peptides — synergistic pairs, caution combinations, and mechanism notes from 20 documented stacks.
→
🗓️
Injection Schedule Calendar
Build your weekly peptide injection schedule — add compounds to each day, track doses and routes, then print your protocol card.
→